Turanci
  • prduct1

Kayayyaki

ET-AY 30/31 Automatic Pressure Calibrator Featured Image
  • ET-AY 30/31 Automatic Pressure Calibrator
  • ET-AY 30/31 Automatic Pressure Calibrator
  • ET-AY 30/31 Automatic Pressure Calibrator
  • ET-AY 30/31 Automatic Pressure Calibrator

ET-AY 30/31 Calibrator Matsi na atomatik

Short Bayani:

Calibrator mai matsa lamba yana da aikin awo na matsi, na yanzu, ƙarfin lantarki da juriya, kuma yana da daidaitaccen ma'auni daidai. Zai iya daidaita mai watsawa na matsin lamba, canjin matsi da ma'aunin matsa lamba. Aikin HART da aka gina, maimakon na'urar da ake sarrafa HART da hannu, ana amfani dashi don saita ko daidaita kewayon mai watsa HART, tilasta fitarwa ta yanzu na mai watsa HART don saita ƙimar, saita aikin layi ko buɗe-ƙofa, na iya aiwatarwa HART sifili ba da izini don firikwensin matsa lamba, kuma ya fi dacewa don amfani fiye da na'urar HART mai aiki da hannu.

Ya dace da filin da amfani da dakin gwaje-gwaje. Ana iya haɗa shi da cikakken dandamali na daidaita matsi na atomatik. Ana iya amfani dashi azaman samfurin matsa lamba na waje na dandalin ma'aunin matsi. Hakanan za'a iya haɗa shi da maɓuɓɓugan matsa lamba daban-daban don ƙirƙirar tsarin daidaitawar matsa lamba.

Zai iya sadarwa tare da kwamfuta ta hanyar RS232 don ganin ikon sarrafa nesa, sarrafa bayanai da bayanan tabbatar da buga takardu.

Allon nuni yana ɗaukar allon launi na inci 2.8, wanda ke da ƙirar nuni mai kyau da wadataccen abun nunin, kuma abun cikin kewayarsa har yanzu a bayyane yake kuma bayyane a cikin yanayin duhu.


Bayanin Samfura

Alamar samfur

Samfurin halaye

Range Yanayin auna ƙarfin matsi: -100kpa ~ 60MPa;

Yana da aikin awo na matsi, halin yanzu, ƙarfin lantarki da juriya.

Supply Gidan wutar lantarki 24VDC mai ciki don watsawa

Function Ayyukan HART da aka gina, maimakon HART hannu, ana iya sauya Sinanci da Ingilishi

Compensation Sakamakon zafin jiki na atomatik

Ma'ajin Bayanai: yana goyan bayan adana fayilolin tabbatarwa guda 30 a lokaci guda, kowane fayil yana adana har zuwa bayanai 110.

¤ Batirin lithium mai bada wutar lantarki

Fihirisar Aiki

Range Yanayin auna ƙarfin matsi: -100kpa ~ 60MPa; daidaito: matakin 0.02, matakin 0.05, matakin 0.1, matakin 0.2.

Unit ureungiyar matsi: akwai nau'ikan nau'ikan matsin lamba guda 12 da suka haɗa da kPa, psi, inHg, inH2O, mmHg, mmH2O, MPa, mashaya, mbar, ATM, kg / cm2 da Pa.

Tooarami kaɗan ko babba ƙungiyar matsa lamba na iya haifar da nunin bayanan da ba na al'ada ba.

Over loadarfin matsin lamba: Lokacin da ƙimar ƙimar matsa lamba ta wuce 110% FS, ana nuna matsi da yawa kuma ana ba da ƙararrawa.

Measure Mizanin zafin jiki: (0 ~ 50) ℃; ƙuduri 0.1 ℃; daidaito: ± 0.5 ℃.

Environment Yanayin aiki:

. A. Yanayin yanayi: (- 5 ~ 50) ℃;

. B Yanayin dangi: ＜ 95% (babu sandaro);

Pressure Matsalar yanayi: (86 ~ 106) kPa.

Temperature Ma'ajin zafin jiki: (- 30 ~ 80) ℃.

Nuni: allon launi mai inci-2.8, nuni mai lamba 5, Sinanci da Ingilishi na iya sauyawa.

Supply Tushen wutan lantarki: ginannen batirin lithium na lithium 3.7v, tare da adaftar wutar lantarki 5V.

¤ Aikin kashe-kashe ta atomatik: kashe aikin kashe wutar ta atomatik kuma saita lokacin kashe-kashe ta atomatik a cikin bayanin tsarin.

Configuration Tsarin tashar tashar tashar sadarwa ta yau da kullun: ƙimar baud: 9600; duba bit: babu; bayanan bayanai: 8; dakatar da bit: 1;

¤ Girma: taken Φ 115 mm x 45 mm; jimlar tsawon: 185 mm.

¤ Nauyin jiki: kimanin 0.5kg.

Connection Haɗin haɗin kai: M20 × 1.5 (ana iya daidaita shi gwargwadon bukatun mai amfani).

ET-AY3031 Precision Pressure Calibrator 1
ET-AY3031 Precision Pressure Calibrator 2
ET-AY3031 Precision Pressure Calibrator 3
  • Na Baya:
  • Na gaba:
    • Rubuta sakon ka anan ka turo mana

    Kayan samfuran

    Buga shiga don bincika ko ESC don rufewa